Rate EnquiryPolypropylene (PP)
EP 548R is a nucleated antistatic formulated, high fluidity heterophasic copolymer used for thin-walled injection molding Items made with EP 548R exhibit high stiffness, relatively good impact resistance and excellent antistatic properties.
- Thin-Walled article
- Article with long flow paths such as flower pots, containers, housewares,
- Filter housings and appliance components Sport, Leisure and toys.
It used for food content
″Jampilen HP552R″ is a high melt flow homopolymer for the production of CF, BCF and fine denier staple fibers at medium to high spinning speeds and exhibits excellent antigasfading properties. ″Jampilen HP552R″ is suitable for nonwoven fabrics for diapers, medical-sanitary applications and wipes. Another typical application is high tenacity continuous filament for straps for backpacks, sport bags, bulk bags and safety belts. Continuous filament with medium tenacity is used for upholstery and sportswear. ″Jampilen HP552R″ is also suited for the production of bulked continuous filament for carpets. ″Jampilen HP552R″ is suitable for food contact.
-Wipes and tissues
-Straps for backpacks, sport bags, bulk bags and for safety belts
-Upholstery and sportswear
– Bulk continuous filament for carpets
– Nonwoven staple fiber
– Injection molded articles, housewares, etc
Z 30 S is a high melt ﬂow homopolymer for the production of low denier BCF, CF and staple ﬁbers at medium to high spinning speeds. Z 30 S offers a high homogeneity, stable extrusion and excellent processability on both short and long spinning lines. This grade allows a high stretch ratio and gives tough and resilient ﬁbers.
Z 30 S is widely used for the production of bulked continuous ﬁlament for carpet face yams. Another major application is the production of high tenacity continuous ﬁlament for straps for backpacks, handles for big bags and safety belts. Continuous ﬁlament with medium tenacity is used for upholstery, sportswear and heavy duty dothing. Z 30 S is also suitable for the production of low denier staple ﬁbres for thermobonding.
Z 30 S is suitable for food contact
C 30 S is a polypropylene homopolymer with a good ﬂow properties and is particularly suitable for the extrusion of ﬁlm yam, monoﬁlament, cast ﬁlm and sheet. C 30 S combines outstanding process ability with good mechanical properties.
C 30 S is particularly suitable to produce ﬁlm yam with the cast ﬁlm process. Film yam of C30S is used for baler twines, packaging twines and ropes.
C 30 S is well suited for the production of monoﬁlament used for instance in brush and broom ﬁlling and technical applications. Other applications of C 30 S are monolayer or coextruded ﬁlm for packaging, thin sheet for stationery folders and sheet for thermoforming.
C 30 S is also used for the extrusion of straws.
C 30 S is suitable for food contact