Polyethylene (PE)

EX5

HM-9450F (EX5) is blown film grade resin which is manufactured by suspension polymerization of ethylene monomer. HM-9450F (EX5) is a bi-model high density polyethylene with 1-Butene as co monomer.

Applications:

For blown films with paper like quality, suitable for counter bags, Carrier bags and wrapping films

BL3

HF- 4760 (BL3) is a high density polyethylene with 1-Butene as co monomer.it is high density and stiffness, good ESCR, high rigidity, good flowability and impact strength.

Applications:

– Small blow moulding

– Bottles

– Containers (up to 5 lit)

-Packaging of pharmaceuticals & surfactants

7000F

HD7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness.

Applications:

-Recommend film thickness at 10-25 micron

– High tensile strength with good dart impact strength

– Low gel contact

– Good moisture barrier

– Food contact applicable (Complies with U.S 21 CFR 177.1520)

-Good impact resistance and processability

– shopping bag and T-shirt bag

– Garbage bag

– Liner bag

– Enhanced ultra thin film

– High stiffness

– Wide service temperature range, UV resistance

3840UA

HD3840UA is high density polyethylene copolymer containing butene-1(C4) as comonomer.

It is suitable for use as rotational moulding applications.

HD3840UA has the following characteristics:

good impact strength, easy to demould, uv stabilised, good whiteness, excellent surface finish.

This grade has food contact approval.

Applications:

general purpose rotomolded items, septic tanks, recycling tanks

6070UA

HD6070UA is high density polyethylene copolymer containing butene-1(C4) as comonomer with medium content of light stabliser additives. It is suitable for general purpose injection moulding items.

HD6070UA has the following characteristics:

good impact strength,easy processing, high warpage resistance, high rigidity,uv stablised.

This grade has food contact approval.

Applications:

crates,boxes,seats

CRP100N

“HM-CPR 100 (N)” is a high density polyethylene with Butene-1 as co monomer. The product is classified as PE100 and shows good stress crack resistance properties (ESCR) combined with good impact strength.

Applications:

• Pipe Extrusion PE100 Class
• Industrial and Pressure pipe
• Drinking water and gas pipes
• Discharge pipes
• Sewer pipes and their fittings

2420 H

Lupolen 2420 H is a non -additivated, low density Polyethylene. It is delivered in pellet form.

Applications

• Bags & Pouches
• Film
• Shrink Film
• Blown Film

Cast Film

LFI 2130

LFI2130 is a high molecular weight, low density polyethylene for producing heavy-duty packaging films for applications like shrink hoods. It contains no slip agent and antiblock additives. It gives outstanding strength and toughness, draw down ability and very good biaxial shrink properties. LFI2130 has been manufactured under SABTEC licensed technology.

Applications:

Multipurpose blow molding process, small blow molded articles, containers for household and Blown film extrusion, heavy duty packaging film, shrink hoods, industrial sacks, carrier bag and liners

LTM 2119X

LTM 2119 X has been manufactured using SABTEC licensed technology. LTM 2119X is a general purpose grade without additives. This grade offers high output and excellent drawdown.

Applications:

LTM 2119X is suitable for general purpose film and lamination.

• Food packaging The above mentioned grade meets the relevant requirements of plastics directive 2002/72/EC (06-08-2002) and its amendments till directive 2008/39EC relating to plastic materials and articles intended to come into contact with foodstuffs.

· Pharmaceutical The above mentioned grade meets the requirements of the European pharmacopeia version 6 section 3.1.5 for pharmaceutical application

L2100TN00

Low-density polyethylene (LDPE) is a thermoplastic made from the monomer ethylene. It was the first grade of polyethylene. LDPE is defined by a density range of 0.917–0.930 g/cm³.

LDPE has more branching (on about 2% of the carbon atoms) than HDPE, so its intermolecular forces (instantaneous-dipole induced-dipole attraction) are weaker, its tensile strength is lower, and its resilience is higher. Also, because its molecules are less tightly packed and less crystalline due to the side branches, its density is lower. LDPE uses majorly revolve around manufacturing containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components, and various molded laboratory equipments. LDPE has an excellent resistance to acids, bases and vegetable oils.

Applications:

Grade with excellent toughness and tear strength and outstanding shrink properties.very low energy consumption during processing and has excellent draw down ability.The material contains no additives and is suitable for application in shrinkhoods,industrial sacks,heavy duty carrier bags and liners.

Additives:

Anti oxidant

LL0209AA

“LL 0209AA” is a LLDPE copolymer with butene as comonomer which contains antioxidant. It is recommended for general purpose applications. It is suitable for blending with conventional LDPE.

Film made from pure LL 02090 AA has the following advantages over conventional LDPE. Better sealing, higher puncture resistance. Greater drawdown capability. Higher tensile strength. Neutralizer: Calcium Stearate. Antioxidant: lrganox1010, lrganox168

Applications:

• Food Grade
• Heave duty sacks, agricultural films,liners.

Produce bags, stretch film